EN ISO 374 Liquid Hydrostatic Pressure Tester
HT-8020
minimum order
1 set
Quantity:
- Type: Liquid Hydrostatic Pressure Tester
- brand name:HOTOTECH
- place of origin:Hubei, China
- Accuracy:1%
- Application:Universal Testing, Auto Testing, Textile Testing, Impact Testing, Process Testing, Lab Testing, Laboratory Testing, Water Testing, Electrical Testing, Torsion Testing, Diesel Testing
- customized support:OEM, ODM, OBM
- power:100W
- Protection Class:IP65
- Voltage:220 V
- warranty:1 Year
Product Description
The liquid hydrostatic pressure tester is used to measure the acid and alkali resistance of permeable acid and alkali protectiveclothingmaterials-static acid pressure resistance to liquid static pressure.
This specialized instrument quantitatively evaluates the resistance of protective clothing materials (e.g., chemical/biological barrier fabrics, laminates, seams) to liquid penetration under static hydrostatic pressure. It simulates scenarios where hazardous liquids (chemicals, blood-borne pathogens, contaminated water) exert sustained pressure against protective gear, critical for certifying PPE used in chemical handling, healthcare, and emergency response.
Technical Parameter
Control system: PLC.
Operation interface: color 7-inch touch screen, Chinese and English switching.
Test solution: 80% concentrated sulfuric acid of different concentrations of acid and alkali.
acid test solution rise rate: (60±3) cm/min.
Pressure range: 0-500 kpa, Pressure sensor: accuracy 0.5% / 1 5 0 mm .
liquid column Maximum acid pressure:greater than 150mm，H2SO 4 (80%)
Test hole: inner diameter size 22mm.
Sample requirements: diameter size is 32 mm;
Printer: Embedded micro printer.
Test steps:
1. The reagent touches the sample vertically from below.
2. Continuously and steadily pressurize the reagent.
3. Observe the sample, record the liquid static pressure when the third droplet appears on the sample.
4. Each sample should be tested 3 times, and the average value should be taken to determine the sample.
The static pressure value.
Operation interface: color 7-inch touch screen, Chinese and English switching.
Test solution: 80% concentrated sulfuric acid of different concentrations of acid and alkali.
acid test solution rise rate: (60±3) cm/min.
Pressure range: 0-500 kpa, Pressure sensor: accuracy 0.5% / 1 5 0 mm .
liquid column Maximum acid pressure:greater than 150mm，H2SO 4 (80%)
Test hole: inner diameter size 22mm.
Sample requirements: diameter size is 32 mm;
Printer: Embedded micro printer.
Test steps:
1. The reagent touches the sample vertically from below.
2. Continuously and steadily pressurize the reagent.
3. Observe the sample, record the liquid static pressure when the third droplet appears on the sample.
4. Each sample should be tested 3 times, and the average value should be taken to determine the sample.
The static pressure value.
