Model No: HT-8000
ISO 17492/EN 367 Firefighter Clothing Thermal Protective Performance Tester
minimum order :
1 set
Quantity :
- Type: Thermal resistance tester
- brand name:HOTOTECH
- place of origin:Hubei, China
- Accuracy:±5%
- customized support:OEM, ODM
- power:500w
- Protection Class:IP55
- Voltage:220 V
- warranty:1 Year
- Product name:Thermal Protective Performance Tester
- Standard:EN 367
- Color:Customer Required
Introduction:
Used to test the thermal protection performance of protective clothing, safety shoes, gloves, helmet outer surfaces, etc. By detecting the thermal protection performance of materials under the action of a predetermined heat source of thermal radiation.
Technical parameter:
1. The heat flow meter is water-cooled, with aworking range of 0-100KW/m2 and a usage range of 150%
2. The response time of the heat flow meter is less than 200ms, theemissivity is greater than 0.95, and the output signal within the working range is greater than 5mv
3. Equipped with a thermal radiation flux display instrument, it can even display the heat flux value
4. Detecting the thermal protection coefficient TPP of protective materials and displaying the time temperature curve
5. The rotor flowmeter can adjust the combustion gas flow rate with an accuracy of ± 2% and a range greater than 3L/min
6. Pointer pressure gauge, intake pressure can be adjusted through a pressure reducing valve, with a range of 0-15psi
7. Four point rotary plug, can manually cut off flammable gases
8. The data acquisition system of the sensor can record a temperature of 150 ℃. The resolution of the temperature acquisition system is 0.1 ° C and the accuracy is ± 0.75 ° C.
9. The data acquisition speed of the automated data acquisition system should be at least 10Hz, and cold end compensation should be provided for the measurement data of thermocouples.
10. Equipped with a computer and printer, accompanied by standard testing software, providing standard testing curves.
11. Voltage：220V 50Hz 10A
2. The response time of the heat flow meter is less than 200ms, theemissivity is greater than 0.95, and the output signal within the working range is greater than 5mv
3. Equipped with a thermal radiation flux display instrument, it can even display the heat flux value
4. Detecting the thermal protection coefficient TPP of protective materials and displaying the time temperature curve
5. The rotor flowmeter can adjust the combustion gas flow rate with an accuracy of ± 2% and a range greater than 3L/min
6. Pointer pressure gauge, intake pressure can be adjusted through a pressure reducing valve, with a range of 0-15psi
7. Four point rotary plug, can manually cut off flammable gases
8. The data acquisition system of the sensor can record a temperature of 150 ℃. The resolution of the temperature acquisition system is 0.1 ° C and the accuracy is ± 0.75 ° C.
9. The data acquisition speed of the automated data acquisition system should be at least 10Hz, and cold end compensation should be provided for the measurement data of thermocouples.
10. Equipped with a computer and printer, accompanied by standard testing software, providing standard testing curves.
11. Voltage：220V 50Hz 10A
12. Weight：150kg.
