Solar Panels PV Photovoltaic Module IV Tester

HTPV-2514

Boost your PV testing efficiency with our Solar Module IV Tester. Meets IEC60904-9 standards with 1000W/m² irradiance. High stability, multi-language software, and fast data entry.

Quantity:

Contact Now

add to cart

Boost your PV testing efficiency with our Solar Module IV Tester. Meets IEC60904-9 standards with 1000W/m² irradiance. High stability, multi-language software, and fast data entry.

Product Introduction

The Solar Module IV Tester is a high-precision professional equipment used for detecting the electrical performance of photovoltaic modules. The equipment employs high-power, long-lifespan imported pulsed xenon lamps as the simulator light source, ultra-high-precision four-channel synchronous data acquisition cards for test data collection, and professional ultra-linear electronic loads to ensure accurate test results. It precisely measures key parameters such as Open-Circuit Voltage (Voc), Short-Circuit Current (Isc), and Maximum Power Point (MPP), and rapidly generates current-voltage (IV) characteristic curves to evaluate the conversion efficiency and perform analysis and detection of photovoltaic modules.

Technical Parameters

Technical Parameter		Specification
Equipment Name		Solar Module IV Tester
Product Model		HTPV-2514
IV Test
Simulated Light Source	Spectral Match	Complies with IEC60904-9 spectral irradiance distribution requirements (AM1.5)
	Total Irradiance Intensity	1000W/m²
	Irradiance Adjustment Range	700W/m² to 1200W/m²
	Irradiance Unevenness	±2%
	Irradiance Instability	±2%
	Single Flash Pulse Time	10ms
Equipment Parameters	Flash Record	Features a flash count prompt function (reset to zero after replacement)
	Xenon Lamp Lifespan	100,000 flashes
	Irradiance Direction	Vertical upward light emission
	Measurement Method	Four-wire measurement
	Measurement Interval	5 seconds
	Data Acquisition	8,000 data acquisition points
	Temperature Measurement	Built-in non-contact infrared temperature measurement, temperature compensation, and display
	Operating Time	The equipment can operate continuously for over 24 hours
Measurement Range	Effective Test Area	2500 × 1400mm
	Test Power Range	5W to 650W maximum component area power
	Measurement Voltage	0mV to 100V (resolution 1mV)
	Measurement Current	0mA to 20A (resolution 1mA)
	Ambient Temperature	15℃ to 35℃
Measurement Accuracy	Inconsistency of Measurement Results	±0.5%
Measurement Accuracy	Measurement Error	± 1%
Software Functions	Measurement Parameters	Isc, Voc, Pmax, Vm, Im, FF, EFF, Temp, Rs, Rsh
	Curve Generation	Automatically generates I-V curves and P-V curves
	Test Condition Correction	Automatic irradiance compensation and temperature compensation
	Software Language	Chinese and English software interface options
	Voice Function	Voice counting and voice prompts for test results
	Barcode Input	Supports manual and automatic barcode number input, as well as automatic increment settings
	Test Result Saving	Can save all main test parameters to a specified file on the hard drive
	Data Aggregation and Printing	Can aggregate data based on set time periods or at any time, and print in Excel format

Recommend Products