0

image
image
image
image
Solar panels Photovoltaic PV modules static dynamic mechanical load tester for IEC61215, IEC61730 standard compliance.

Solar panels Photovoltaic PV modules static dynamic mechanical load tester

HTPV-08D
This mechanical load test equipment is designed for solar panel manufacturers and testing labs to verify module reliability under dynamic and static loads, complying with IEC61215 and IEC61730 standards. It simulates extreme wind, snow, and ice pressure conditions to ensure solar panels can withstand real-world environmental stresses without damage or performance loss.
Mechanical Load Testing Host Computer:
8 cylinders 32 suction cups
15 cylinders 60 suction cups
18 cylinders 72 suction cups
24 cylinders 96 suction cups
60 cylinders 60 suction cups
66 cylinders 66 suction cups
72 cylinders 72 suction cups
84 cylinders 84 suction cups
Quantity:
Contact Now
add to cart

This mechanical load test equipment is designed for solar panel manufacturers and testing labs to verify module reliability under dynamic and static loads, complying with IEC61215 and IEC61730 standards. It simulates extreme wind, snow, and ice pressure conditions to ensure solar panels can withstand real-world environmental stresses without damage or performance loss.

Testing Machine’s advantage
1.Dynamic & static integration, can satisfy the Dynamic load testing, and also satisfy the Static load testing
2.The Static load mode：The positive load can realize +8000 Pa (can adjustable)
The reverse load can realize -6000 Pa (can adjustable)
3.Dynamic load mode：Dynamic load:1000 Pa, 1000 times, the dynamic load frequency:7s±3s
4.Cycle times：Free Setting
5.Pressure control accurate：5%
6.Real-time display of the solar panel’s deformation, and drawing of the force curve and pressure curve
7.During testing, real-time monitor the current & voltage of the solar panel
8.When the deformation value is more than the setting value, the machine will automatically protect
and stop
9.When the current is more than the setting value, the machine will automatically protect and stop

The Mainly Feature
1.The mechanical load tester raw material: Aluminum profile structure  (firm and Antirust)
2.The mechanical load tester can satisfy 2015mm×996mm solar panel size, ( It can be adjustable, and suited for different solar panel’s size testing)
3.Pneumatic and force value feedback ways: low friction force cylinder, tensile pressure
Sensor ( the accurate:0.1N)
4.The cylinder: 10 PCS, the telescopic stroke:125mm
5.Sucker：40 PCS, The diameter:120mm ( 1 cylinder attached to 4 suckers, Between the sucker
Center to sucker center distance ≤200mm, sucker with the rotation function, the rotation angle≥15 
6.Control ways: Computer control
7.The mechanical load tester can save the testing result and export it to report.

Mechanical load tester software feature：
 
  1. Computer operate and control software by HOTOTECH researched and development, easy operate and test data stable
  2. The software supports Chinese and English, with the Switching function
  3. Software real-time display pressure, deformation, testing time, cycle times, and current electricity continuity
  4. Software real-time drawing pressure and deformation curve
  5. Software real-time displays each cylinder’s force value and draws the force value curve
  6. Testing data real-time storage, query & print
  7. The Testing data can be exported in Word，Excel, PDF,  or JPG format
  8. The software with the fault warning function