0

Impulse tester is designed to apply impulse voltage on solar module according to MST14 in the IEC61215 standard. HTPV-24 impulse voltage, impulse voltage generator.

HTPV-24 Solar panels impulse voltage test equipment IEC61215

HTPV-24
Impulse tester is designed to apply impulse voltage on solar module according to MST14 in the IEC61215 standard. HTPV-24 impulse voltage, impulse voltage generator.
Delivery
FOB
minimum order
1
Supply Ability
100 / Month
Country of Origin
CHINA
Stock Time
30Day
Quantity:
Contact Now
add to cart

Solar Panels Impulse Voltage Test Equipment is designed to apply impulse voltage to solar modules in accordance with MST 14 of the IEC 61215 standard. This equipment functions as an impulse voltage generator, with a model designation of HTPV-24.

1.Introduction 

This equipment is designed to apply impulse voltage on solar module according to MST14 in the IEC61215 standard.

2.Feature

  1. Positive voltage and negative voltage could be altered;
  2. Divide 6 gear to apply impulse voltage on different capacitive load;
  3. Oscilloscope and voltage divider are applied to capture the curve of the impulse voltage;
  4. IPC with window10 system is communicated with Oscilloscope to display the curve;
  5. Rising time and falling time of impulse voltage is calculated by IPC;
  6. Result could be reported in IPC.

3.Components

Sr. NoComponentQuantityBrand
1Impulse voltage power supply1ZEALWE
2Oscilloscope1TEKTRONIX
3Voltage divider1ZEALWE
4Attenuation probe1TEKTRONIX
5Test table1ZEALWE

4.Technical parameters 

4.1 Impulse voltage generator 

  1. Voltage range:3KV to 25KV +/-3%;
  2. Rising edge time:1.2 μs +/-30 %;
  3. Falling edge half-life:50 μs +/-20 %;
  4. Times: 1-999 times
  5. Pulse repetition time: 20-9999s
  6. Temperature scope of use: 5-40℃
  7. Operating humidity range: ≤80%, and no condensation;
  8. Power: 2KW
  9. Dimension (Length*Width*Height): 1200*800*1800mm;
  10. Weight: 200kg;

  11. 4.2 Oscilloscope 

  12. Display screen: 9 inches (color)
  13. Number of channels: 2
  14. Real-time sampling frequency: 1.0GSa/S
  15. Bandwidth: 100MHz
  16. Peak detection: 3.5ns
  17. Maximum resolution: ≥5 μs /div @ 4 GSa/s
  18. Memory depth: 20M
  19. Input sensitivity: 2mV/div-5V/div
  20. Maximum input voltage(1MΩ): 300V RMS Peak ≤±450V
  21. Time base gear: 2 ns/div to 100s/div
  22. Time base delay range: -15div-5000 ns
  23. Time base precision: ≤ ±25 ppm
  24. Pulse width range: 20ns to 8s
  25. Video polarity: Positive polarity, negative polarity
  26. Vertical range: ±5div
  27. Isolation between channels: ≥100:1

  28. 4.3 Voltage divider

  29. Input voltage: 1kV～40kV
  30. Type: Resistance
  31. Temperature coefficient: 100PPm/℃
  32. Time responsibility: ≤100nS
  33. Voltage divide ratio: 200:1

  34. 4.4 Attenuation probe

  35. Attenuation ratio: 100:1
  36. Input impedance: 200MΩ
  37. Input capacitance: 3PF
  38. Maximum input: 300V
  39. Bandwidth: 100MHz l
  40. Compensation capacitor: 3～25PF

  41. 4.5 Table

  42. Dimension(L*W*H): 2500mm*1500mm*750mm