HT-6013 Helmet Projection And Surface Friction Testing Machine
HT-6013
High-precision Helmet Surface Friction Testing Machine designed to evaluate shell resistance using standard abrasive paper. Fully simulates surface friction with constant force and speed. Ideal for helmet manufacturers and certification labs ensuring compliance with international safety standards.
Instrument processing customization:
Helmet Testing Machine
Quantity:
The helmet wear testing machine presses the helmet's force onto a fixture with sandpaper on the surface, passes through the sandpaper surface, and evaluates the helmet's anti friction performance.
According to ECE R22.05 Standard requirement
Helmet surface friction testing machine will take helmet with a certain force pressed on the fixture (this fixture can move), the fixture surface installed with abrasive paper of standard specified particle size, then will make the test helmet through from abrasive paper surface for a certain speed, thereby to judge resistance friction performance of helmet.
1. The machine can do cut testing on protruding areas and surface friction testing
2. The mass of Impact weight: 15kg
3. The height of drop weights: 500mm
4. Mass of loading system: 400N (40.8kg)
5. The release device uses a pneumatic release
6. On the lever guiding system, can install abrasive pap or cut block
7. Headform can rotate 360°
8. Infrared measurement velocity door installation at the bottom of guide rail
9. Touch screen control
Helmet surface friction testing machine will take helmet with a certain force pressed on the fixture (this fixture can move), the fixture surface installed with abrasive paper of standard specified particle size, then will make the test helmet through from abrasive paper surface for a certain speed, thereby to judge resistance friction performance of helmet.
1. The machine can do cut testing on protruding areas and surface friction testing
2. The mass of Impact weight: 15kg
3. The height of drop weights: 500mm
4. Mass of loading system: 400N (40.8kg)
5. The release device uses a pneumatic release
6. On the lever guiding system, can install abrasive pap or cut block
7. Headform can rotate 360°
8. Infrared measurement velocity door installation at the bottom of guide rail
9. Touch screen control
