0

image
image
Test the corrosion resistance of the product in a salt chamber. The corrosion analysis test and salt spray test standard are in accordance with the requirements of IEC 61701-2011.

HTPV-11 salt spray test standard machine corrosion analysis salt chamber

HTPV-11
Test the corrosion resistance of the product in a salt chamber. The corrosion analysis test and salt spray test standard are in accordance with the requirements of IEC 61701-2011.
Quantity:
Contact Now
add to cart

Test the corrosion resistance of the product in a salt chamber. The corrosion analysis test and salt spray test standard are in accordance with the requirements of IEC 61701-2011.

Name: Slat mist+flow mixed gas corrosion test chamber

Standard: According to IEC 61730-2001 Standard requirement

Purpose: The test is used to test the anti-erosion quality of the surfa-ce of all materials after the rust-proof of painting, coating , electro-plating, anoding and rust -proof of greasing

Test introduce :slat solution use sodium chloride (chemistry pure .analytically pure) and distilled water or deionized water configure,the concentration is (5+0.1) % (mass fraction). under the2)"C measure PH value between 6.5~7.2 . take the test object pla-ced in the salt mist chamber, under the 15C~35'C spray salt 2h. S-pray finished after, take the test object move to the damp heating chamber storage 20h~22h.

The temperature is (4012) 'C, relative humidity (90+3) %, comprise a cycle . Take the cycle repeat three times , then use the water clean after under the 55C drying 1h and under the air conditioning temperature2) 'C, relative humidity 45%~55%] storage 1-2h, comprise a cycle.